LG GSA-4120B: High Speed Multi-format Champion
- Posted in
- Storage
Burn Tests DVD-R Media
We repeated the same benchmark from the previous page with DVD-R discs of varying quality.MCC 02RG20:
Here is how the burner performed using Verbatim 8X DVD-R discs. These were the only discs that we could find which would burn 8X DVD-R on the burner.According to the burn and read charts from the GSA-4120B, this looks like a flawless burn. Below, you can see how the burner read the discs back.
Like the DVD+R counterpart, the Mitsubishi DVD-R was readable, but just barely. We were fairly certain that the read would fail on us until the 2.5GB mark. Why the read decided to level off at that point does not seem clear. The Q-Check benchmark seems to suggest the inverse is true; that disc quality was lower near the end of the disc, rather than the beginning.
CMC MAG AF1:
Here, we used store-bought Imation discs to test DVD-R capability.Below, they are played back in the Plextor.
The PX-712A does a good job reading this disc - we would consider it a good burn. The Plextor drive limits the read at 10X, something it does not do for other media.
AN31:
Again, we used low quality Platinum discs that we found in a bargin bin at Microcenter.Here, we attempted to read the discs in the Plextor.
Our LG drive was barely capable of reading the disc about 1X speeds, and the read process actually failed using the Plextor drive. Unless you plan on burning coasters with your GSA-4120B, stay away from this media.
Below are a set of write descriptors that we could find for DVD-R media:
- MCC 01RG20 : 4X
- MCC 02RG20 : 8X
- PRINCO: 4X
- PVCR001002: 4X
- RITEKG04 : 4X
- CMC MAG AF1: 4X
- AN31: 4X
- TYG01: 4X
Originally published at https://www.anandtech.com/show/1356 (Wayback Machine).










