The Return of 2-2-2: Corsair 3200XL & Samsung PC4000
- Posted in
- Memory
AMD Athlon 64 Performance Test Configuration
The recently introduced nForce3-250 and VIA K8T800 PRO chipsets finally promise a working PCI/AGP lock to Athlon 64. Earlier chipsets only had a working AGP/PCI lock on a handful of boards such as the AOpen AK89 Max. Thus far, we have tested the Epox, MSI, Chaintech, and Gigabyte nF3-250 chipset motherboards and found a working AGP lock on all these Socket 754 boards. We also found a working PCI lock on the 2nd revision of the Abit KV8 PRO based on the VIA K8T800 PRO chipset, but we had some issues with multipliers on that board.The same chipsets are used with the just-released AMD Socket 939 Dual-Channel processor. We are in the early stages of testing dual-channel Socket 939 motherboards, but we have been working with Asus on their A8V Deluxe based on the VIA K8T800 PRO chipset. Early revisions had no PCI/AGP lock and limited overclocking, but Asus made a hardware revision to shipping boards, which added a working AGP/PCI lock. The board has also improved through a number of beta BIOS to the point where the most recent beta BIOS has fixed many of the issues with overclocking on the Asus A8V. We have been able to achieve 1:1 overclocks as high as 265 FSB on the A8V with the latest BIOS.
While it is far too early to establish a standard memory test bed with a Socket 939 board, we have been experimenting with the working AGP/PCI lock to allow effective testing of Athlon 64 memory performance. With Intel moving to DDR2 in the upcoming 915/925X, we will likely move DDR testing to an Athlon 64 Dual-Channel test bed in the near future.
| Athlon 64 Performance Test Configuration | |
| Processor(s): | AMD Athlon 64 3800+ Socket 939 |
| RAM: | 2 x 512MB Corsair 3200XL (DS) 2 x 256MB Samsung PC4000 (SS) |
| Hard Drives | Seagate 120GB IDE 7200 RPM (8MB Buffer) |
| PCI/AGP Speed | Fixed at 33/66 |
| Chipset Drivers: | VIA Hyperion 4.51 |
| Video Card(s): | ATI 9800 PRO 128MB, 128MB aperture, 1024x768x32 |
| Video Drivers: | ATI Catalyst 4.6 |
| Power Supply: | Antec True Power 430W |
| Operating System(s): | Windows XP Professional SP1 |
| Motherboards: | Asus A8V Deluxe (VIA K8T800 PRO) Beta BIOS 1005.020 |
In our testing with Socket 939 boards, we found the best performance is achieved at a tRas setting of 10. All Performance Tests were run with a 10 tRas setting.
Test Settings
The Athlon 64 also has the unique feature of unlocked multipliers below the rated speed on all processors, and both above and below rated speed on the FX chips. This feature is not currently available on Pentium 4 processors. The unlocked lower ratios combined with a working AGP lock makes it possible to take a different approach to testing memory performance on the Athlon 64. It is possible to look at a fixed Processor speed and variable Memory speeds to see the real impact of just higher memory speeds on typical performance.The standard Quake 3 (Open GL), Super PI (raw calculation performance), SiSoft Sandra 2004 Standard Buffered memory test (synthetic memory test), and SiSoft Sandra 2004 Standard UNBuffered memory test were run as usual. However, to test more effectively the effect of memory speed on performance, we expanded the benchmarks used for testing. UT2003 (Direct X 8) and Aquamark 3 (Direct X 9) were added to the memory tests to provide a broader range of performance measurements.
Originally published at https://www.anandtech.com/show/1352 (Wayback Machine).