Archive 1997–2024

The Mushkin Source 500GB SATA SSD Review: A Value Proposition For An Everyday PC

Idle Power Measurement

SATA SSDs are tested with SATA link power management disabled to measure their active idle power draw, and with it enabled for the deeper idle power consumption score and the idle wake-up latency test. Our testbed, like any ordinary desktop system, cannot trigger the deepest DevSleep idle state.

Idle power management for NVMe SSDs is far more complicated than for SATA SSDs. NVMe SSDs can support several different idle power states, and through the Autonomous Power State Transition (APST) feature the operating system can set a drive's policy for when to drop down to a lower power state. There is typically a tradeoff in that lower-power states take longer to enter and wake up from, so the choice about what power states to use may differ for desktop and notebooks.

We report two idle power measurements. Active idle is representative of a typical desktop, where none of the advanced PCIe link or NVMe power saving features are enabled and the drive is immediately ready to process new commands. The idle power consumption metric is measured with PCIe Active State Power Management L1.2 state enabled and NVMe APST enabled if supported.

Active Idle Power Consumption (No LPM)Idle Power Consumption

The active idle power consumption of the Mushkin Source seems a bit high given the lack of external DRAM to power, but in the slumber state it is quite competitive against other SATA drives.

Idle Wake-Up Latency

The Mushkin Source has a notably slow wake-up from sleep, taking more than 2.6ms when a typical time for SATA SSDs is around 1ms. The Toshiba TR200 also has a similarly long wake-up latency, and the HP S700 likely only avoids that by not having a working slumber state at all.

Originally published at https://www.anandtech.com/show/13421/the-mushkin-source-sata-ssd-review (Wayback Machine).