OCZ 3700EB: Making Hay with Athlon 64
- Posted in
- Memory
Intel Test Results: OCZ 3700EB
To be considered stable for test purposes, Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration.| OCZ 3700EB (DDR466) - 2 x 512Mb Double-Bank | |||||
| Speed | Memory Timings & Voltage | Quake3 fps | Sandra UNBuffered | Sandra Standard Buffered | Super PI 2M places (time in sec) |
| 400DDR 800FSB |
2.5-2-3-5 2.5V |
322.0 | INT 2752 FLT 2769 |
INT 4460 FLT 4452 |
131 |
| 433DDR 866FSB |
2.5-2-3-5 2.5V |
350.2 | INT 3024 FLT 3007 |
INT 4838 FLT 4837 |
121 |
| 466DDR 933FSB |
3-2-3-5 2.5V |
377.9 | INT 3214 FLT 3218 |
INT 5201 FLT 5202 |
113 |
| 500DDR 1000FSB |
3-2-3-5 2.75V |
403.5 | INT 3484 FLT 3486 |
INT 5581 FLT 5585 |
105 |
| 524DDR 1048FSB |
3-2-3-6 2.85V |
415.0 | INT 3639 FLT 3703 |
INT 5922 FLT 5891 |
100 |
At DDR466, OCZ 3700EB was able to run our complete memory test suite at SPD timings. The DIMMs were stable at the standard 2.5V to 2.6V at the rated timings at DDR466, which is even lower voltage than specified. As we saw in our earlier EB review, the memory can handle voltage and rewards higher voltage with even better timings at the high end. We achieved the best performance on the Intel test bed with the lowest Cycle Time (tRAS) that we could run. Therefore, tRas on Intel chipsets should be set at 5 or 6 for the best performance, rather than the 8 set in SPD.
Originally published at https://www.anandtech.com/show/1327 (Wayback Machine).