Archive 1997–2024

FIRST LOOK: Foxconn 755-A01 for Athlon 64


Our Take

We still don't have the killer SiS 755 board that we have been searching for, but the Foxconn can hardly be faulted on the solid performance it delivered. Across the board, performance was competitive with the top Athlon 64 boards that we have tested and it was generally a "top-half" board. When you consider the majority of our tested motherboards are top-of-the-line, the Foxconn performance has to be considered outstanding.

Where the Foxconn particularly stands out is in value. While most every top-end board has Gigabit LAN, Firewire, and SATA RAID, it isn't often that you find a board that costs less than $90 that includes all theses features. Not only is SATA RAID present on the 755-A01, but the Foxconn even has a second Silicon Image controller and supports up to 4 total SATA drives. The layout was also excellent, and did not suffer from the sloppy connector placement that we see too often in less than full-size boards.

The area that was particularly weak on the Foxconn was overclocking controls, as in there really aren't any. You can do some modest overclocking with the limited FSB controls, but that's it. This is really a shame, because the 755-A01 has decent Dram timing adjustments that would make it ideal for using fast memory. However, with no vDIMM adjustments at all, you won't be able to do much with high-end memory. We do hope Foxconn will add more of the types of adjustments that overclockers like to see on motherboards. The 755-A01 is too good to be hampered by no voltage controls.

If you are looking for a Socket 754 board, the Foxconn provides a great list of standard features at a bargain price. You get a lot of board for less than $90. If you are not an overclocker or you only want to try your hand at very modest overclocking, then you will not be disappointed in the Foxconn. It competes well at stock speeds with the best Athlon 64 boards that we have tested. However, if you have any interest in overclocking your Athlon 64, you need to look elsewhere. The 755-A01 is not the board to combine with a low cost 2800+ or 3000+ if your goal is to reach the performance levels of a 3400+ or higher. The Foxconn would also be a disappointment for those trying to run memory at the higher speeds possible. With no vDIMM adjustments at all, you would be limited with some of the better high-end memory that wants 2.8V or 3.0V to reach best performance at high-speed.

The Foxconn 755-A01 is an excellent value and it will fit the needs of many. It will not meet the needs of the Enthusiast, but it shows great promise for the future of Foxconn boards.

Originally published at https://www.anandtech.com/show/1317 (Wayback Machine).