Archive 1997–2024

FIRST LOOK: Foxconn 755-A01 for Athlon 64


Basic Layout: Foxconn 755-A01 for Athlon 64





Click to enlarge.


The 755-A01 is back, and is slightly smaller than standard ATX size. There are mounting holes for 6 standoffs for chassis mounting. Despite the smaller size, the Foxconn has a long list of features that you don't expect at this price point.



The layout of the 755-A01 is quite good, with all DIMM sockets clear of the 8X AGP slot. The IDE and floppy connectors are in the preferred upper right edge location. ATX and 12V connectors are split on each side of the center-board CPU location, but presented no cooling problems. The 4 SATA connectors are spread across the board behind the PCI slots. These would have been better grouped in the same general area near the right edge of the board.

The only concession to price and size appears to be the 2-phase power regulation. You rarely find 3-phase designs at this price point. However, all-in-all, the components and connectors are logically laid out with no glaring oversights. Foxconn put some effort into the layout of the 755-A01 and it shows. Good job!



Yes, there is a firewire port on the back. There is also a Gigabit LAN connector and 4 USB 2 ports. Headers on the board provide additional port expansion.

Originally published at https://www.anandtech.com/show/1317 (Wayback Machine).