Archive 1997–2024

The ASRock X399 Taichi Motherboard Review: Cost-Effective Threadripper

Test Bed and Setup

As per our testing policy, we take a high-end CPU suitable for the motherboard that was released during the socket’s initial launch and equip the system with a suitable amount of memory running at the processor maximum supported frequency. This is also typically run at JEDEC subtimings where possible. It is noted that some users are not keen on this policy, stating that sometimes the maximum supported frequency is quite low, or faster memory is available at a similar price, or that the JEDEC speeds can be prohibitive for performance. While these comments make sense, ultimately very few users apply memory profiles (either XMP or other) as they require interaction with the BIOS, and most users will fall back on JEDEC supported speeds - this includes home users as well as industry who might want to shave off a cent or two from the cost or stay within the margins set by the manufacturer. Where possible, we will extend out testing to include faster memory modules either at the same time as the review or a later date.

Test Setup
Processor AMD Ryzen Threadripper 1950X,
16 Cores, 32 Threads, 3.4 GHz (4.0 GHz Boost)
Motherboards ASRock X399 Taichi (BIOS P2.00)
Cooling Noctua NH-U14S TR4-SP3
Power Supply Corsair AX1200i Platinum PSU
Memory Corsair Vengeance LPX 32GB (4 x 8GB)
DDR4 DRAM 2666MHz
Memory Settings XMP @ 2666
Video Cards ASUS ROG Strix Radeon RX 570
Hard Drive Crucial MX200 1TB
Case Open Test Bed
Operating System Windows 10 Build 1803 64-bit

Readers of our motherboard review section will have noted the trend in modern motherboards to implement a form of MultiCore Enhancement / Acceleration / Turbo (read our report here) on their motherboards. This does several things, including better benchmark results at stock settings (not entirely needed if overclocking is an end-user goal) at the expense of heat and temperature. It also gives in essence an automatic overclock which may be against what the user wants. Our testing methodology is ‘out-of-the-box’, with the stock BIOS installed and XMP enabled, and thus subject to the whims of this feature. It is ultimately up to the motherboard manufacturer to take this risk – and manufacturers taking risks in the setup is something they do on every product (think C-state settings, USB priority, DPC Latency / monitoring priority, overriding memory sub-timings at JEDEC). Processor speed change is part of that risk, and ultimately if no overclocking is planned, some motherboards will affect how fast that shiny new processor goes and can be an important factor in the system build.

The ASRock X399 Taichi has the "Overclock Mode" setting in BIOS set to "Auto" by default. "Auto" means that it is turned on, as the motherboard was temporarily boosting our Ryzen Threadripper 1950X processor up to about 4.0 GHz. The Extreme Memory Profile (X.M.P.) is set to "Auto" by default, which does not use any profile but safe settings for the RAM. Our DDR4-2666 modules were set to 2133 MHz by default. We enabled the X.M.P. profile manually. 

Users will note that we are using an RX 570 graphics card here, which is not 'the best of the best' for a high-end platform like Threadripper. This was ultimately down to logistics at the time of testing; our gaming tests rarely become more than a checkbox to ensure that no fishy business is going on.

Many thanks to...

We must thank the following companies for kindly providing hardware for our multiple test beds. Some of this hardware is not in this test bed specifically, but is used in other testing.

Hardware Providers
Sapphire RX 460 Nitro MSI GTX 1080 Gaming X OC Crucial MX200 +
MX500 SSDs
Corsair AX860i +
AX1200i PSUs
G.Skill RipjawsV,
SniperX, FlareX
Crucial Ballistix
DDR4
Silverstone
Coolers
Silverstone
Fans

Originally published at https://www.anandtech.com/show/13137/the-asrock-x399-taichi-motherboard-review (Wayback Machine).