Archive 1997–2024

OCZ 3500EB: The Importance of Balanced Memory Timings


Test Results: OCZ 3500EB

To test overclocked stability, we used the very demanding Gun Metal 2 - Benchmark 2, which pushes systems with its DX9 routines. To be considered stable for test purposes, Gun Metal, our Quake3 benchmark, UT2003 Demo, Super PI, Halo, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI and Gun Metal, will crash a less-than stable memory configuration.

OCZ 3500EB (DDR433) - 2 x 512MB Double-Bank
Speed Memory Timings & Voltage Quake3 fps Sandra UNBuffered Sandra Standard Buffered Super PI 2M places
(time in sec)
400DDR
800FSB
2.5-2-3-5
2.5V
322.2 INT 2735
FLT 2782
INT 4456
FLT 4459
131
433DDR
866FSB
2.5-2-3-5
2.65V
350.4 INT 3009
FLT 3018
INT 4856
FLT 4867
121
466DDR
933FSB
3-2-3-5
2.65V
376.5 INT 3216
FLT 3241
INT 5204
FLT 5215
113
500DDR
1000FSB
3-2-3-5
2.85V
403.3 INT 3457
FLT 3501
INT 5580
FLT 5586
104
510DDR
1020FSB
3-2-3-6
2.85V
408.1 INT 3516
FLT 3557
INT 5715
FLT 5718
102

At DDR433, OCZ 3500EB clearly meets its specifications. We were able to run our complete memory test suite at the SPD timings with no problem. We did achieve the best performance on the Intel test bed, however, with the lowest Cycle Time (tRAS) that we could run. Therfore, the best performance on an Intel chipset was with the lowest possible tRAS, which is reported in the chart.

It is also worth mentioning that OCZ 3500EB was completely stable at 2.5-2-3 timings to DDR460. Above 460, we needed to raise our CAS setting to CAS 3 for most stable performance. However, across the DDR400 to DDR510 range we were able to maintain a tRP (RAS Precharge) of 2, and a tRCD (RAS-to-Cas Delay) value of 3.

Originally published at https://www.anandtech.com/show/1289 (Wayback Machine).