OCZ 3500EB: The Importance of Balanced Memory Timings
- Posted in
- Memory
Enhanced Bandwidth Technology
So, what does OCZ mean by Enhanced Bandwidth? How does it work?Basically, Enhanced Bandwidth (EB) is a means of increasing memory bandwidth by optimizing memory latencies for the best interaction between the memory and the chipset and memory controller. By analyzing memory traffic and benchmark results under varying memory latency settings in the CMOS setup of the BIOS, OCZ claims to have pinpointed the bottlenecks that most affect performance. They further claim that conventional wisdom regarding some memory latencies, namely that the lowest CAS latency yields the best performance, were found to no longer hold true in the higher speed memory of today.
| Timing diagram for two modules, one running at TRCD-4, CL-2.5, tRP-4 (bottom) and the second with tRCD-3, CL-2.5, tRP-2 (top) showing two consecutive bursts of 8 from two different pages - one of the most common scenarios in real world applications. The effective bandwidth is the ratio between data transfers (black diamonds):NoOps (red arrows). In the case of EB this ratio is 8:7, while without EB it is 8:10, meaning that every transfer of 16 bits is penalized with either 7 or 10 subsequent bus idle cycles. (Clk: clock; Act: row activate command; Rd: read command; Pr: Precharge command, NoOp: No Operation) |
OCZ further explains that their EB series uses low tRP (RAS Precharge, which has a value of 2 in EB) and tRCD (RAS-to-Cas Delay, with a value of 3 in EB) latencies to enhance performance. This is then combined with a Variable Early Read Command to allow for the highest possible effective data bandwidth. Using these optimizations, OCZ says that in most applications, the 2.5-2-3 (CL-tRP-tRCD) will deliver bandwidth that is indistinguishable from CL-2 modules.
| The effect of issuing an early Read Command on back-to-back transactions of consecutively requested data blocks within the same page. Following one Row Activate Command, three Read commands are given at a CAS Latency of either 2, 2.5 or 3. The colored diamonds are the data transfers that belong to the Read Command in the same color. The graph shows that the net effect of increasing the CAS latency is a single cycle delay within a string of (in this case) 12 consecutive transfers, but no degradation of bandwidth. The double-arrows indicate the CAS latency which is amended by moving the read command further to the left (relative to the end of the previous burst). (Clk: clock; Act: row activate command; Rd: read command; Pr: Precharge command, CL: CAS Latency) |
OCZ says that they have redesigned their memory products using these findings to deliver the highest possible bandwidth to any computer system, and they call these new products EB or Enhanced Bandwidth.
A more technical explanation is beyond the scope of this memory review, but those of you who would like more information on the theories behind Enhanced Bandwidth should take a look at the OCZ Enhanced Bandwidth white paper.
Is OCZ correct: can memory timings of 2.5-2-3 perform just as well as CAS 2 in many applications? Our goal is to find out.
Originally published at https://www.anandtech.com/show/1289 (Wayback Machine).

