Archive 1997–2024

nForce3-250 - Part 2: Taking Athlon 64 to the Next Level


Benchmarking nForce3-250GB

Before we benchmark nVidia's new nForce3-250Gb, we needed to decide exactly what we were going to test. There were several areas of particular interest:

How does nForce3-250Gb compare to other chipsets that we have tested? In this case, the FX5950 video card was removed and our standard ATI 9800 PRO 128mb video card was installed. So that results could be truly compared to previous benchmarks published at AnandTech, the 3400+ was replaced with the 3200+, which we have used for virtually every Athlon 64 board that we have tested. In the interest of consistency, we also replaced the 512MB of 2-2-2-5 memory with 1GB of memory (2 x 512MB) that also ran fine at 2-2-2-5 timings.

How does nForce3-250Gb perform with top components? Is the nF3-250Gb a better performer with an nVidia FX5950 Ultra? Here, it would not have been comparing apples to run ATI benchmarks with the 9800 PRO, since the 9800 XT is the current top-of-the-line. So, full benchmarks were run with both the nVidia top-line 5950Ultra and the ATI top-line 9800 XT. To provide a sanity check, we also ran a full series of benchmarks with the SiS 755 chipset, a 3400+, and the ATI 9800 XT. Since we had found the SiS board to be one of the fastest that we have tested, we wanted to see if nF3-250 benchmarks with ATI were comparable to the best performance we had seen with ATI on Socket 754. If nForce3-250 only performs comparably to the best with a 5950U, the utility of the chipset is somewhat limited. However, if nF3-250 performs just as well as the best with ATI - and even better with 5950U - then the 5950U performance is a nice bonus.

Originally published at https://www.anandtech.com/show/1279 (Wayback Machine).