Archive 1997–2024

The MSI Z370I Gaming Pro Carbon AC (mITX) Motherboard Review: Balanced Gaming Diet

Overclocking

Experience with the MSI Z370I Gaming Pro Carbon AC

Being a Mini-ITX size board, most users already have a mindset that overclocking will suffer against a full-sized motherboard which may (or may not) have better power delivery on it. What testing has shown, all three Mini-ITX Z370 based motherboards were only limited by CPU temperature and not the fault of the board. The experience with the MSI Z370I Gaming Pro Carbon AC was no different. Even with warm ambient temperatures (~28C) the board was able to handle whatever we threw at it.

Overclocking using the Game Boost functionality yielded a 100 Mhz increase on call cores to 4.4 GHz without an AVX offset and increased the voltage to 1.20V to accomplish this small increase. The notable voltage increase over stock is well more than is needed for the clock speed. This behavior has become typical from all board partners when using automatic overclocking.

When manually overclocking, doing so was a breeze inside the BIOS with the vast majority of frequently used options on one page of the OC section. Changes to CPU multiplier, BCLK, Voltages, and enabling XMP profiles can be adjusted via one screen - no digging down to change these items. The only notable item we ran into during testing was needing to raise the power limits to run at 4.5 GHz without power limit throttling. This type of protection we are also seeing more frequently in the past. A quick adjustment however and users will be on their way.

Overall, MSI's Click BIOS 5 is laid out to where most items users need to edit are all found on one screen. About the only item we need to go into a sub-section and are the power limits. The board was able to handle overclocking without putting up a fight.

Overclocking Methodology

Our standard overclocking methodology is as follows. We select the automatic overclock options and test for stability with POV-Ray and OCCT to simulate high-end workloads. These stability tests aim to catch any immediate causes for memory or CPU errors.

For manual overclocks, based on the information gathered from the previous testing, starts off at a nominal voltage and CPU multiplier, and the multiplier is increased until the stability tests are failed. The CPU voltage is increased gradually until the stability tests are passed, and the process repeated until the motherboard reduces the multiplier automatically (due to safety protocol) or the CPU temperature reaches a stupidly high level (90ºC+). Our test bed is not in a case, which should push overclocks higher with fresher (cooler) air.

Overclocking Results

In the end, the MSI Z370I Gaming Pro Carbon pushed to 5.1 GHz using all cores, no AVX offset using 1.34V. This result was right in line with nearly all boards we have tested so far outside of the SuperMicro Mini-ITX we looked at a bit ago which was hampered by current limits. During testing, the VRMs were warm to the touch so the heatsinks were able to manage without issue. VDroop was non-existent with the setting left to Auto. If anything there was a slight increase in voltage as we are able to see on the chart below.

Originally published at https://www.anandtech.com/show/12763/msi-z370i-gaming-pro-carbon-ac-review (Wayback Machine).