Archive 1997–2024

The GIGABYTE B360 Gaming 3 WIFI Review: A Cheaper Alternative at $120

System Performance

Not all motherboards are created equal. On the face of it, they should all perform the same and differ only in the functionality they provide - however, this is not the case. The obvious pointers are power consumption, but also the ability for the manufacturer to optimize USB speed, audio quality (based on audio codec), POST time and latency. This can come down to manufacturing process and prowess, so these are tested.

Power Consumption

Power consumption was tested on the system while in a single GPU configuration with a wall meter connected to the Corsair HX 750 power supply. This power supply is Platinum rated. As I am in the US on a 120 V supply, leads to ~87% efficiency > 75W, and 92%+ efficiency at 375W, suitable for both idle and multi-GPU loading. This method of power reading allows us to compare the power management of the UEFI and the board to supply components with power under load, and includes typical PSU losses due to efficiency. These are the real world values that consumers may expect from a typical system (minus the monitor) using this motherboard.

While this method for power measurement may not be ideal, and you feel these numbers are not representative due to the high wattage power supply being used (we use the same PSU to remain consistent over a series of reviews, and the fact that some boards on our test bed get tested with three or four high powered GPUs), the important point to take away is the relationship between the numbers. These boards are all under the same conditions, and thus the differences between them should be easy to spot.

Power: Long Idle (w/ GTX 980)

Power: OS Idle (w/ GTX 980)

Power: Prime95 Blend (w/ GTX 980)

Our Power Consumption tests show the GIGABYTE B360 Gaming 3 Wi-Fi taking at the top of our charts on power use. In both idle states as well as our load testing, it managed to use the least amount of power of the tested systems so far with 37W/41W in the idle testing, and 118W in load testing. The load testing shows a difference of nearly 20W from the first Z370 based board, and 1W less than the H370N WIFI. 

Non-UEFI POST Time

Different motherboards have different POST sequences before an operating system is initialized. A lot of this is dependent on the board itself, and POST boot time is determined by the controllers on board (and the sequence of how those extras are organized). As part of our testing, we look at the POST Boot Time using a stopwatch. This is the time from pressing the ON button on the computer to when Windows 10 starts loading. (We discount Windows loading as it is highly variable given Windows specific features.

Non UEFI POST Time

POST times on this board also managed to break new records in our testing with a POST time of 18.4 seconds. When we disabled additional controllers and such, that dropped about a half second. Otherwise, its fairly close set of results in the top half with three seconds separating most of the boards. We do have some outliers in the NZXT and SuperO boards taking 30 seconds or more to boot. 

DPC Latency

Deferred Procedure Call latency is a way in which Windows handles interrupt servicing. In order to wait for a processor to acknowledge the request, the system will queue all interrupt requests by priority. Critical interrupts will be handled as soon as possible, whereas lesser priority requests such as audio will be further down the line. If the audio device requires data, it will have to wait until the request is processed before the buffer is filled.

If the device drivers of higher priority components in a system are poorly implemented, this can cause delays in request scheduling and process time. This can lead to an empty audio buffer and characteristic audible pauses, pops and clicks. The DPC latency checker measures how much time is taken processing DPCs from driver invocation. The lower the value will result in better audio transfer at smaller buffer sizes. Results are measured in microseconds. 

Deferred Procedure Call Latency

Our DPC latency results for the AORUS B360 Gaming 3 WIFI reached 357µs which is the slowest result so far. The rule of thumb here is anything under 300µs should allow for smooth audio, but it does not sneak in under that value. Try as I may, I did not hear any audio drops or losses with this result. 

Originally published at https://www.anandtech.com/show/12656/gigabyte-b360-gaming-3-wifi-120-usd (Wayback Machine).