Thermaltake's Xaser III Skull Series - A Case For the Tough Guy
- Posted in
- Cases/Cooling/PSUs
Expansion
The VM3000A was designed with a few things in mind. One of these is expandability. Hidden behind the front bezel are six 5-1/4" drive bays and four 3-1/2" bays. Since the top bay is used for the included instrument panel, five of the 5-1/4" drive bays remain to be utilized. There is a spot for a floppy drive and three 3.5" hard drives below that at middle height of the case's front end. The last three 5-1/4" bays are at the lower section. Another area where a hard drive can be mounted is the swing bar, which is new to this model. A spare drive can be mounted with screws via 4 holes. Being a desktop case, five 5-1/4" drive bays sounds excessive since 2-3 at most are used in a typical desktop rig. Instead, converting the lower 3 bays to 3-1/2" would make more sense, especially since hard drives are still the standard medium for storage.The swing bar also has a device that prevents the add-on cards from popping out of their slots. The casing that holds the 80mm fan in place also has 7 clips that, when the swing bar is in the closed position on the frame, holds full width add-on cards in place. Tiny features like this can help reduce many hardware problems.
Originally published at https://www.anandtech.com/show/1264 (Wayback Machine).
