Archive 1997–2024

LCD – For the Novice and the Expert


Where do manufacturers get their specs?



© VESA

We worked closely with VESA and NEC during our last few LCD reviews to assure our testing procedures were correct. Unfortunately, it seems as if not all manufacturers adhere to the same standards. LCD substrates are always produced to a certain specification, whether it be 250cd/m^2 or 16ms, etc. These specifications are straight from the OEM (LG.Philips, AUO). However, manufacturers usually retest the final product after assembling all of the components (including bezel and stand). Sometimes, if the manufacturer ends up with a more desirable figure, that figure goes into the final specification.

   Brightness (cd/m2)  Colors  Contrast Ratios
NEC 1760NX 260 16,200,000 450:1
ViewSonic VP171B 260 262,000 500:1
Hitachi CML174 260 16,700,000 400:1
BenQ FP767 260 16,000,000 500:1
Planar PX171M 260 16,700,000 400:1
AUOptronics (OEM) 260 262,000 450:1

As you can see, there are some clear irregularities, even though all of these monitors are produced from the same panel. Our general rule of thumb is to find the OEM for every monitor we review. Thus, when we looked at the Hitachi CML174, we compared our specification expectations with that of the AUO specifications. On the next page, you will see a short table of how each test is conducted for LCDs.

Originally published at https://www.anandtech.com/show/1137 (Wayback Machine).