Searching for the Memory Holy Grail - Part 2
- Posted in
- Memory
The Candidates
With what we know now about 875/875 memory configurations, the ideal test of the fastest memory available would be four double-bank modules. However, not all memory manufacturers had DS DDR500 modules available. Therefore, to be fair in our memory comparison, we asked memory vendors, at the very minimum, to supply 2 DS DIMMs or 4 SS modules of their fastest memory for evaluation. Over several weeks, we received PC4000/DDR500 samples from Corsair, Geil, Kingston, OCZ and Adata. OCZ 3700 Gold was also included in the roundup, since it is known to perform at DDR500.
| DDR500 Memory Specifications | ||||||
| Adata PC4000 | Corsair XMS 4000 | Geil Platinum 4000 | Kingston HyperX 4000 | OCZ 4000 Copper | OCZ 3700 Gold | |
| Number of DIMMs & Banks | 2 DS | 2 DS | 2 DS | 4 SS | 2 DS | 2 DS |
| DIMM Size Total Memory | 512 MB 1 GB |
512 MB 1 GB |
512 MB 1 GB |
256 MB 1 GB |
512 MB 1 GB |
256 MB 512 MB |
| Rated Timings | 3-4-4-8 | 3-4-4-8 | 2.5-4-4-7 | 3-4-4-8 | 3-4-4-7 | 2.5-3-3-7 @DDR466 |
| Rated Voltage | ? | 2.75V | 2.6-2.95V | 2.65V | 2.7V | 2.65V @DDR466 |
With each set of DDR500 memory, we tested at the following settings:
1. 800FSB/DDR400 – the highest stock speed supported on 875/865 motherboards.To test overclocked stability, we used a run of the very demanding Gun Metal 2 — Benchmark 2, which pushes systems with its demanding DX9 routines. To be considered stable for test purposes, Gun Metal, our Quake3 benchmark, UT2003 Demo, and Super PI had to complete without incident. Any of these four, and in particular Super PI and Gun Metal, will crash a less-than stable memory configuration.
2. 1000FSB/DDR500 – the specified rating of the memory modules that we were testing.
3. Highest Stable Overclock – the highest settings that we could achieve with the memory being tested.
Originally published at https://www.anandtech.com/show/1131 (Wayback Machine).