Kingwin KT-424 Aluminum Case
- Posted in
- Cases/Cooling/PSUs
Benchmark
We have a few heat and sound intensive tests lined up for the Kingwin KT-424. The Heatsink reading is actually the temperature inside the heatsink. CPU temperature is recorded as a separate measurement. All temperature is recorded in degrees Celsius. The heat tests were each performed inside the closed case with the external temperature of 23.0 degrees Celsius, during a full system load. The fan speeds on the front rheobus was placed on high. Our test bed consists of:| Thermometer Positions | |
|
|
| Gigabyte GA-7VRX | |
| AMD Athlon MP 2100+ | |
| 2 x 128 DDR Corsair XMS 2400 | |
| ThermalTake Volcano 7 | |
| Seagate Cheetah 10000RPM | |
| Inno3D GeForce4 Ti 4200 | |
| PCP&C; 475W Turbo Cool | |
The thermal readings for the different components during operation were as follows:
| Kingwin KT-424-WM | ||||||
| CPU | Video | Heatsink | Mobo 1 | Mobo 2 | HD | |
| After 10 minutes | 50.7 | 35.7 | 35.1 | 26.3 | 29.1 | 27.1 |
| After 30 minutes | 51.0 | 36.3 | 36.2 | 27.1 | 30.0 | 27.5 |
| ThermalTake Xaser III | ||||||
| CPU | Video | Heatsink | Mobo 1 | Mobo 2 | HD | |
| After 10 minutes | 51.2 | 34.8 | 36.4 | 25.4 | 24.1 | 29.1 |
| After 30 minutes | 51.7 | 36.9 | 37.7 | 26.2 | 24.7 | 30.4 |
| Kingwin KT-436-WM | ||||||
| CPU | Video | Heatsink | Mobo 1 | Mobo 2 | HD | |
| After 10 minutes | 54.0 | 32.5 | 38.0 | 25.0 | 28.5 | 27.2 |
| After 30 minutes | 54.5 | 33.3 | 38.9 | 26.1 | 29.0 | 28.6 |
Sound is recorded in decibels, 12" away from the closed case in order to replicate a production system most accurately. Ambient noise ran about 21dBA, and the power supply fan was disabled.
| dBA | |
| Kingwin KT-424 Aluminum | 48 |
| ThermalTake Xaser III Aluminum Fan High | 55 |
| ThermalTake Xaser III Aluminum Fan Low | 52 |
| Cooler Master ATC-201A Aluminum | 53 |
| Kingwin KT-436-BK-WM Aluminum | 50 |
Cooling tests pretty much confirmed what we already knew. The two intakes above the hard drives provide enough airflow to keep the case reasonably cool, but not quite as well as the larger Xaser III or the KT-436. Keep in mind, the older KT-436 has more fans and also a much higher price tag. The lower hard drive speeds are most likely attributed to the vertical stacking of the hard drives, whereas the KT-436 has stacked them horizontally.
The reduced exhaust (1x80mm fan) lowered the noise level slightly. Using some higher quality fans would reduce the noise level significantly, but our loudest item in the case is the Volcano 7 (which we will probably phase out for future reviews). Overall performance was about part for this case. Feel free to check the statistics of some of our older case reviews.
Originally published at https://www.anandtech.com/show/1129 (Wayback Machine).
