Archive 1997–2024

2003 Power Supply Roundup Part II: Better Faster Cheaper

A lot of Sparkle’s power supplies share similar components to Fortron, but that does not mean they have not developed their ability to innovate independently.  We were pretty amazed when Sparkle told us they managed to cram a 120mm fan inside a standard ATX power supply. Getting a 120mm fan is not uncommon, but enclosing it within an ATX housing is.

We are particularly interested how this PSU will fare in the noise test. A 120mm fan can push more CFM (cubic feet per minute) of air than an 80mm fan, while doing so at a slower speed.  Check out our sound test to see how this might benefit you.  An interesting note about this power supply is that the fan starts up at full revolutions, then throttles down to the correct RPM.

Click to Enlarge
Click to Enlarge

This power supply features no ATX cable sheathing, so you may wish to invest a few dollars in some cable management.  For us, plastic twist ties do the trick.

Click to Enlarge
Click to Enlarge

Features on the Sparkle FSP350-60PN are relatively light.  There are neither serial ATA connectors, nor motherboard monitoring connectors either.  The honeycomb grill on the rear of the unit should provide enough passive airflow, which is a necessity if the 120mm fan is to operate properly.

Wattages

 

3.3V

5V

12V

-12

-5

+5vsb

combined theoretical

actual combined

advertised  total

Sparkle FSP350-60PN

92.40

150.00

192.00

9.60

1.50

10.00

242.40

220.00

350.00

The important thing to realize is the combined wattage on the +3.3V and +5.0V rails.  Even though PCs are ever increasingly dependant on the +12V rail, AMD users need to keep a close eye on the +3.3V power line.  The FSP350 produces a very good 220W on the combined rail.

The Sparkle FSP350-60PN retails for under $50, which makes it a fairly reasonably priced power supply, albeit only 350 watts.

Originally published at https://www.anandtech.com/show/1124 (Wayback Machine).