Archive 1997–2024

Gigabyte 7VT600 1394 (KT600): More Fun with KT600


Gigabyte 7VT600 1394: Stress Testing

We performed stress tests on the 7VT600 1394 in several different areas and configurations, including:

1. Chipset and motherboard stress testing, which was conducted by running the FSB at 205MHz; and,
2. Memory stress testing, which was conducted by running RAM at 400MHz with one DIMM slot filled and at 400MHz with all three DIMM slots filled at the lowest memory timings possible.

Front Side Bus Stress Test Results:

As standard practice, we ran a large load of stress tests and benchmarks to ensure the 7VT600 1394 was absolutely stable at each overclocked FSB speed. These stress tests included Prime95 torture tests, which were run in the background for a total of 24 hours.

In addition, we proceeded to run several other tasks, such as data compression, various DX8 games, and light apps like Word and Excel, and Prime95 in the background. Finally, we re-ran our entire benchmark suite, which includes Sysmark 2002, Quake3 Arena, Unreal Tournament 2003, SPECviewperf 7.0, Jedi Knight 2 and XMPEG. In the end, 205MHz FSB was the highest overclock we were able to achieve with the 7VT600 1394 without encountering any reliability issues.

Memory Stress Test Results:

This memory stress test is very basic, as it simply tests the ability of the 7VT600 1394 to operate at its officially supported memory frequency (400MHz DDR) and at the lowest supported memory timings that our Corsair TwinX LL modules support:

Stable Dual DDR400 Timings
(1/3 banks populated)
Clock Speed: 200MHz
Timing Mode: Ultra
CAS Latency: 2.0
Bank Interleave: 4-bank
RAS to CAS Delay: 2T
RAS Precharge: 6T
Precharge Delay: 2T
Command Rate: 1T

It’s not surprising to see that the 7VT600 1394 achieved such low memory timings with just one memory module spec’ed at DDR400, running at 400MHz DDR. It is quite standard for any P4 or Athlon XP motherboard to achieve these aggressive performance settings. Thankfully, it looks like KT600 motherboards will have no trouble achieving low memory latencies, as illustrated in the next chart.

The following stress test is obviously a bit more strenuous on the memory subsystem than most memory stress tests. It tests the rare occasion that a desktop user will install three DIMMs running 400MHz DDR at the most aggressive memory timings available in the BIOS:

Stable Dual DDR400 Timings
(3/3 banks populated)
Clock Speed: 200MHz
Timing Mode: Normal
CAS Latency: 2.0
Bank Interleave: Disabled
RAS to CAS Delay: 3T
RAS Precharge: 6T
Precharge Delay: 2T
Command Rate: 1T

It is not unusual to see these lax timings for such a strenuous memory subsystem test as this one. However, we have seen better, and so in this case, the 7VT600 1394 is not comparable to most other modern motherboards. Still, this seems to be the norm for KT600 motherboards. It’s worth reiterating that the real world performance difference between aggressive memory timings and relaxed memory timings, such as SPD, are very small. In other words, unless you’re hell-bent on squeezing every last bit of performance from your system, SPD timings will work just fine 99% of the time.

We tested all these memory timings using several stress tests and general applications to guarantee stability. We initiated the tests by running Prime95 torture tests; a grand total of 24 hours of Prime95 was successfully run at the timings listed in the above charts. We also ran Sciencemark (memory tests only) and Super Pi. All three stress tests did not phase the 7VT600 1394.

Originally published at https://www.anandtech.com/show/1121 (Wayback Machine).