Gigabyte 7NNXP (nForce2 Ultra 400): Gigabyte Goes nForce
- Posted in
- Motherboards
Performance Test Configuration
| Performance Test Configuration | |
| Processor(s): | AMD Athlon XP 3200+ (400MHz FSB) |
| RAM: | 2 x 256MB Corsair PC3200 TwinX LL (v1.1) Modules (SPD rated at CAS 2-2-2-6) |
| Hard Drive(s): | Western Digital 120GB 7200 RPM Special Edition (8MB Buffer) |
| Bus Master Drivers: | NVIDIA nForce version 2.03 (January 30, 2003) VIA 4in1 Hyperion 4.47 (May 20, 2003) |
| Video Card(s): | MSI GeForce4 Ti 4600 (AGP 4X) |
| Video Drivers: | NVIDIA Detonator 44.03 (May 14, 2003) |
| Operation System(s): | Windows XP Professional SP1 |
| Motherboards: | Epox 8KRA2+ (KT600) @ 202.44MHz FSB Gigabyte 7NNXP (nForce2 Ultra 400) @ 202.77MHz FSB |
All performance tests run on nForce2 Ultra 400 motherboards utilized two 256MB Corsair TwinX LL PC3200 (v1.1) modules set to CAS 2-2-2-5 timings in dual channel DDR400 mode. All performance tests run on the KT600-based 8KRA2+ utilized the two Corsair modules listed in the chart above with the following performance settings:
| DDR400 Timings (2/3 banks populated) |
|
| Clock Speed: | 200MHz |
| Timing Mode: | Ultra |
| CAS Latency: | 2.0 |
| Bank Interleave: | 4-bank |
| RAS to CAS Delay: | 2T |
| RAS Precharge: | 6T |
| Precharge Delay: | 2T |
| Command Rate: | 1T |
- AGP fast write enabled
- AGP Aperture set to 128MB
Originally published at https://www.anandtech.com/show/1119 (Wayback Machine).