Archive 1997–2024

Gigabyte 7NNXP (nForce2 Ultra 400): Gigabyte Goes nForce

Gigabyte 7NNXP: Stress Testing

We performed stress tests on the 7NNXP in several different areas and configurations, including:

1. Chipset and motherboard stress testing was conducted by running the FSB at 222MHz
2. Memory stress testing was conducted by running RAM at 400MHz with two DIMM slots filled and at 400MHz with all four DIMM slots filled in dual DDR mode at the lowest timings possible.

Front Side Bus Stress Test Results:

As standard practice, we ran a large load of stress tests and benchmarks to ensure the 7NNXP was absolutely stable at each overclocked FSB speed. These stress tests included Prime95 torture tests, which were run in the background for a total of 24 hours.

We proceeded to run several other tasks, such as data compression, various DX8 games, and light apps like Word and Excel with Prime95 running in the background. Finally, we reran our entire benchmark suite, which includes Sysmark 2002, Quake3 Arena, Unreal Tournament 2003, SPECviewperf 7.0, Jedi Knight 2 and XMPEG. In the end, 222MHz FSB was the highest overclock we were able to achieve with the 7NNXP without encountering any reliability issues.

Memory Stress Test Results:

This memory stress test examines the motherboard’s ability to operate at its officially supported memory frequency (400MHz DDR), and at the lowest supported memory timings that our Corsair TwinX LL modules support:

Stable Dual DDR400 Timings
(2/4 banks populated)
Clock Speed: 200MHz
Timing Mode: N/A
CAS Latency: 2.0
Bank Interleave: N/A
RAS to CAS Delay: 2T
RAS Precharge: 4T
Precharge Delay: 2T
Command Rate: N/A

It’s not surprising to see that the 7NNXP achieved such low memory timings with just two memory modules spec’ed at DDR400 running in dual channel DDR400 mode. It is standard for any P4 or Athlon XP motherboard to achieve these aggressive performance settings, though only nForce2 and nForce2 Ultra 400 motherboards can achieve a RAS Precharge as low as 4T. However, we suggest you run your memory at CAS 2-2-2-5 instead, as we discovered some time ago that CAS 2-2-2-4 is a bit slower than CAS 2-2-2-5. Of course, the difference will never be noticeable in real world usage.

The following memory stress test is obviously a bit more strenuous on the memory subsystem than most memory stress tests, as it tests for stability when a desktop user installs four DIMMs running in dual DDR400 mode at the most aggressive memory timings attainable in the BIOS:

Stable Dual DDR400 Timings
(4/4 banks populated)
Clock Speed: 200MHz
Timing Mode: N/A
CAS Latency: 2.0
Bank Interleave: N/A
RAS to CAS Delay: 3T
RAS Precharge: 6T
Precharge Delay: 2T
Command Rate: N/A

It is not unusual to see such lax timings for such a strenuous memory subsystem test such as this. However, we have seen better and so in this case, the 7NNXP does not perform as well as most other modern-day motherboards. Again, the real world performance difference is negligible, so we urge you not to flip out ove small variances in memory timings as seen in the two charts above.

We tested all these memory timings using several stress tests and general applications to guarantee stability. We initiated the tests by running Prime95 torture tests; a grand total of 24 hours of Prime95 was successfully run at the timings listed in the above charts. We also ran Sciencemark (memory tests only) and Super Pi. All three stress tests could not make the 7NNXP fail at the timings listed in the above charts.

Originally published at https://www.anandtech.com/show/1119 (Wayback Machine).