Archive 1997–2024

The Phononic HEX 2.0 TEC CPU Cooler Review

Testing results, low fan speed (7 Volts)

Note that the voltage refers only to that of the fan, the TEC requires a constant 12V supply.

Fan Speed (7 Volts)

Core Temperature, Constant Thermal Load (Low Fan Speed)

Average Thermal Resistance

The advantage of using a TEC at lower thermal loads becomes more apparent when the cooler fans are running at a reduced speed. Here we see that the performance of the HEX 2.0 was only slightly affected by the change of the fan’s speed under a thermal load of 60W, registering a thermal resistance of 0.1200 °C/W, a value comparable only to that of the best air coolers available. However, once again, the thermal performance of the HEX 2.0 degrades sharply as the thermal load increases, especially for thermal loads above 200W. With a thermal load of 340W, the thermal resistance of the HEX 2.0 is only 0.2506 °C/W, a very poor value that only outperforms low range and stock coolers.

Noise level

In terms of acoustics performance, the 92 mm fan of the HEX 2.0 is virtually noiseless under these operating conditions. Our instruments recorded 33.6 dB(A) from a distance of one meter, only 3.2 dB(A) higher than our floor noise level. It will not be easily discernible by human ears inside a normal room, but it can be discerned if someone focus on the task.

Originally published at https://www.anandtech.com/show/10695/the-phononic-hex-2-0-tec-cpu-cooler-review (Wayback Machine).