Archive 1997–2024

Comtrend PG-9172 Powerline Adapter Review: G.hn Gets Primed for Retail Push

Evaluation Setup and Testing Methodology

G.hn's claims of being better than HomePlug AV2 in real-world scenarios was always something we had wanted to test out for ourselves. In order to evaluate the claims, we took out all the powerline adapters that had come in for review over the last four years and subjected all of them to the same iperf benchmarks under the same conditions across different power outlets in a residence. Prior to going into the details of the evaluation, let us take a look at the features of the different powerline adapters being considered today.

Comparative PLC Configurations
Aspect Comtrend PG-9172
Technology G.hn HomePlug AV2
Chipset Marvell 88LX3142 for G.hn Digital Baseband
Marvell 88LX2718 Analog Front End
Qualcomm Atheros QCA7500
Encryption 128-bit AES 128-bit AES
Performance 1200 Mbps (PHY) / 1000 Mbps 1000 Mbps (PHY) / 1033 Mbps
(AV2 MIMO Powerline 0 - 65 MHz Theoretical Max.)
Miscellaneous Features MIMO (Multiple Input Multiple Output)
G.hn / HPAV Co-existence Technology
MIMO (Multiple Input Multiple Output)
Dimensions 93mm x 59.6mm x 35mm 90mm x 60mm x 27mm
Weight 100g 95g
Retail Availability May 2015 December 2014
Current Street Price (Kit) USD 77 USD 83

All the testing was carried out in a 1800 sq. ft. single-level detached California residence built in the 1970s. The rough floorplan of the house, along with the testing locations, is presented below.

The evaluation of the adapters was done in an isolated network. A NUC with an Intel NIC (running Windows 10 Pro x64) was configured to act as a DHCP server, and placed at location 'M' (in red) in the above picture. The 'master node' powerline adapter was connected to it. Yet another NUC with an Intel NIC (running Windows 10 Pro x64) was connected to the other adapter in the network. The location of this NUC / adapter combination was varied for each adapter pair's evaluation run. We considered typical powerline adapter usage scenarios in deciding upon the locations for the testing (A - F in green in the picture above). All major rooms, including the garage, were covered.

The purpose of our benchmarking was not to tune the stream configuration for obtaining maximum possible bandwidth. Rather, we wanted to replay the same stream for multiple adapter sets in order to determine comparative performance. iperf with default parameters was used for benchmarking. On the 'server', we ran the following command:

TCP: iperf -s -B 10.1.1.2
UDP: iperf -s -u -B 10.1.1.2

The 'client' was connected to it using the following command:

TCP: iperf -c 10.1.1.2 -P ${num_parallel_streams} -t 30
UDP: iperf -c 10.1.1.2 -u -b ${curr_bw_to_test}m -t 30

The number of parallel streams were tested between 20 and 25 for the TCP case. The maximum obtained bandwidth was recorded. For the UDP case, we altered the bandwidth to test in order to arrive at the value that resulted in less than 1% packet loss during transmission. The roles of the server and client were then reversed, and the same benchmarks were processed.

Originally published at https://www.anandtech.com/show/10293/comtrend-pg9172-powerline-adapter-review-ghn-gets-primed-for-retail-push (Wayback Machine).