Archive 1997–2024

The Crucial MX300 750GB SSD Review: Micron's 3D NAND Arrives

AnandTech Storage Bench - The Destroyer

The Destroyer is an extremely long test replicating the access patterns of very IO-intensive desktop usage. A detailed breakdown can be found in this article. Like real-world usage and unlike our Iometer tests, the drives do get the occasional break that allows for some background garbage collection and flushing caches, but those idle times are limited to 25ms so that it doesn't take all week to run the test.

We quantify performance on this test by reporting the drive's average data throughput, a few data points about its latency, and the total energy used by the drive over the course of the test.

AnandTech Storage Bench - The Destroyer (Data Rate)

The average data rate for the MX300 is between the scores of the 1TB and 500GB MX200 but a little closer to the latter. This is acceptable performance but not really an upgrade over the MX200.

AnandTech Storage Bench - The Destroyer (Latency)

The average service time of the MX300 is slow enough to put it among the budget planar TLC drives and well behind the SanDisk X400.

AnandTech Storage Bench - The Destroyer (Latency)AnandTech Storage Bench - The Destroyer (Latency)

The MX300 has a higher frequency of both moderate and severe latency outliers than the MX200, but it isn't a huge discrepancy. The performance relative to the SanDisk X400 shows that there is room for improvement.

AnandTech Storage Bench - The Destroyer (Power)

The MX300's power consumption comes in a distant second place behind the BX100, but this is still remarkable efficiency for a TLC drive.

Originally published at https://www.anandtech.com/show/10274/the-crucial-mx300-750gb-ssd-review-microns-3d-nand-arrives (Wayback Machine).