Archive 1997–2024

Compulab fitlet-XA10-LAN Review: A Fanless AMD UCFF PC for Networking Applications

Networking Benchmarks

The configuration of the fitlet-XA10-LAN makes it ideal for use in networking applications. Typical uses include operation as a dedicated router, or a firewall appliance (using pfSense or VyOS), or even just generating network traffic for evaluation of other components in the network. Many use-cases can also be served with a standard Linux Mint installation.

Detailed benchmarking of the unit for a particular network application is beyond the scope of this review. However, we did install VyOS on the machine to test out its capabilities as a router. VyOS had no trouble recognizing the USB WLAN adapter and the four Intel NICs. We configured the unit as described in the Quick Start Guide of the official manual. eth3 was configured as the WAN interface. eth0 was configured as a LAN interface. The NAT, DHCP server, DNS forwarder and firewall policies were set up as indicated in the above guide.

Even though plenty of benchmarks can be run for this router configuration, we decided to focus on NAT throughput with the default configuration. In order to test that aspect, we configured a NUC to act as a DHCP server on its wired interface. This wired interface was connected to the WAN port of the VyOS fitlet. The NUC itself was set to a static IP (10.1.1.2) and it gave the VyOS fitlet an IP address of 10.1.1.1.

The fitlet's LAN port was connected to another NUC, and it received an IP address in the configured subnet (192.168.50.0/24). iperf was used to track throughput across the NAT, with the WAN machine acting as a server and the LAN machine acting as a client.

Since the WLAN interface of the NUCs was connected to our default network, we could log on via Remote Desktop to process the iperf commands.

In terms of performance, the fitlet-XA10-LAN was able to route a respectable 843 Mbps across the NAT in the above-mentioned configuration. The fitlet-XA10-LAN with two active LAN interfaces idled at around 9W. When routing at full rate across the two network interfaces, the power consumption peaked at around 15W.

The Intel NICs and the powerful 'unlocked' AMD SoC ensure that the fitlet-XA10-LAN is a powerful network appliance in a compact form factor.

Originally published at https://www.anandtech.com/show/10244/compulab-fitletxa10lan-review-a-fanless-amd-ucff-pc-for-networking-applications (Wayback Machine).