Archive 1997–2024

The SilverStone Strider Platinum 550W PSU Review

Hot Test Results

Looking at a detailed breakdown of performance under higher temperatures, the SilverStone Strider Platinum delivers mediocre electrical performance under stress for a PSU of its class. Our instrumentation recorded a maximum ripple of 60 mV on the 12V line, which is half of the 120 mV design limit, yet not really good for a premium PSU. Similarly, the voltage ripple on the 3.3V and 5V lines is 20mV and 26mV respectively. The voltage regulation leaves much to be desired as well, since we recorded excellent regulation of just 1.8% for the 12V line, but higher than 3.2% for the 3.3V/5V lines. These figures are uninspiring for a premium PSU design and surpass even the advertised 3% regulation.

Main Output
Load (Watts) 111.94 W 278.08 W 413.92 W 548.1 W
Load (Percent) 20.35% 50.56% 75.26% 99.65%
  Amperes Volts Amperes Volts Amperes Volts Amperes Volts
3.3 V 1.74 3.43 4.34 3.4 6.51 3.36 8.68 3.31
5 V 1.74 5.16 4.34 5.09 6.51 5.07 8.68 5
12 V 7.97 12.17 19.92 12.11 29.87 12.02 39.83 11.95

 

Line Regulation
(20% to 100% load)
Voltage Ripple (mV)
20% Load 50% Load 75% Load 100% Load CL1
12V
CL2
3.3V + 5V
3.3V 3.5% 10 16 18 20 12 22
5V 3.2% 12 18 20 26 14 26
12V 1.8% 26 30 46 60 68 36

Even though this PSU is rated at 40 °C, we had no problem reaching it with a significantly higher ambient temperature. The impact on the conversion efficiency was minimal, with average nominal load (20-100%) efficiency dropping by only 1%, with a balanced drop across the entire load range and only slightly greater at maximum load, indicating that the components are not being overly stressed. The maximum efficiency now is 93% at 50% load, dropping down to a minimum of 89% at maximum load.

The semi fanless design of the Strider Platinum did not like the high ambient temperature inside our hotbox at all, forcing the fan to start nearly instantly after the PSU has been powered on. In order to combat the high ambient temperatures and, consequently, the high internal temperatures of the unit, the fan’s speed increases significantly alongside with the load, reaching nearly its maximum speed at 100% capacity. With a load greater than 200 Watts under such adverse conditions, the Strider Platinum would be clearly audible by the system’s user if a room reached these conditions. Nevertheless, the internal temperatures of the PSU do not get overly high, with the heatsinks staying below 90 °C under maximum load.

Originally published at https://www.anandtech.com/show/10207/the-silverstone-strider-platinum-550w-psu-review (Wayback Machine).