Archive 1997–2024

The Toshiba Q300 SSD Review: Toshiba Becomes a Retail Brand

Idle Power Consumption

Since the ATSB tests based on real-world usage cut idle times short to 25ms, their power consumption scores paint an inaccurate picture of the relative suitability of drives for mobile use. During real-world client use, a solid state drive will spend far more time idle than actively processing commands. Our testbed doesn't support the deepest DevSlp power saving mode that SATA drives can implement, but we can measure the power usage in the intermediate slumber state where both the host and device ends of the SATA link enter a low-power state and the drive is free to engage its internal power savings measures.

We also report the drive's idle power consumption while the SATA link is active and not in any power saving state. Drives are required to be able to wake from the slumber state in under 10 milliseconds, but that still leaves plenty of room for them to add latency to a burst of I/O. Because of this, many desktops default to either not using SATA Aggressive Link Power Management (ALPM) at all or to only enable it partially without making use of the device-initiated power management (DIPM) capability. Additionally, SATA Hot-Swap is incompatible with the use of DIPM, so our SSD testbed usually has DIPM turned off during performance testing.

Our SATA power measurements are conducted using a meter with a resolution of 1mA for the current on the 5V rail, giving our power consumption scores a resolution of 5mW. (The meter can offer microampere resolution for currents up to 400mA, but many drives would blow that fuse before the OS could put them to sleep.)

Idle Power Consumption (HIPM+DIPM)

For mobile use, the Q300 falls in the second tier of drives that have acceptable but not great power consumption in the slumber state. Differences of a few tens of milliwatts won't have much impact on battery life for the kinds of devices that use 2.5" drives rather than M.2 or mSATA SSDs.

Active Idle Power Consumption (No ALPM)

In a desktop situation with SATA ALPM disabled, the Q300 and Trion 100 offer the best idle power consumption. The other low-end TLC drives are drawing three times as much power.

Originally published at https://www.anandtech.com/show/10084/the-toshiba-q300-ssd-review (Wayback Machine).