StarTech Standalone Hard Drive Eraser And USB 3.0 Dock Capsule Review
- Posted in
- Storage
- USB 3.0
- SATA
- DAS
- StarTech.com
Final Words
The StarTech Standalone Hard Drive Eraser and USB 3.0 Dock's feature set is great, and there are no obvious omissions. All of its features are easy to use and as self-explanatory as can be expected from a screen that only shows two lines of text; no manual is needed, but a one-page leaflet further clarifies how to use the device.
The dock's performance is functional, but disappointing. The USB dock capability is clearly a secondary concern. It's fast enough to mostly keep pace with a mechanical hard drive, but its performance with a solid state drive is much worse than we would have expected based just on the SATA 2 and USB 3.0 speed limits. Its random access performance is particularly bad and clearly much worse than some external SSDs we've tested that are also using USB to SATA bridge chips. This isn't a device anyone should consider as their primary external storage interface. In the context of data security it is sufficient for inspecting what's on a drive or perhaps for re-imaging after wiping. If you don't need to erase drives routinely, you can get higher-performing docks for a fraction of the cost: this dock has a MSRP of $283.99 compared to only $71.99 for a StarTech USB 3.1 dock that supports 6Gbps SATA and UASP.
As a hard drive eraser, the performance is also a concern. Despite sustaining over 200MB/s of writes over USB, its full-drive overwrite modes only wipe drives at 125MB/s. In some cases this won't matter, as a big drive might need to be left as an overnight job either way, but issuing the same write command with an incremented logical block address shouldn't be hard. It seems likely that the FPGA is being used to implement a processor core that just isn't fast enough; it also seems like that processor is getting in the way for the USB mode when the SATA commands should be passed directly to the drive. Fortunately, the dock is equipped to receive firmware updates, so StarTech might be able to improve things. If the time taken to wipe a hard drive is not a concern, then the eraser dock is a very convenient turnkey solution. If you have to process a very large number of drives and especially if you have to image large batches of drives, a computer with multiple hot-swap bays will be preferable.
The one mode where I have no performance complaints is also the mode I actually need. Performing an ATA Secure Erase under Windows is inconvenient at best and frequently impossible. With the addition of a hot-swap bay to our SSD testbed PC, what had been the most ridiculously complicated step of the test procedure is now foolproof and fast. With a minimum of ten erases per drive needed for our client drive test suite, the eraser dock is a very welcome tool and it's just about perfect for this use case.
Originally published at https://www.anandtech.com/show/10024/startech-hard-drive-eraser-dock-capsule-review (Wayback Machine).
